| Preparation
-
Clear
the area where you will install the sod.
-
Level
the soil approximately 1 inch lower than any hard surfaces
such as a patio, sidewalk, or driveway.
-
Water
the soil until it is moist.
|
-
Install
all sod on a cool, moist soil base
within 4 to 6 hours of delivery in hot weather and 6
to 12 hours in cool temperatures.
-
The
delivery person will place the pallets across the area
you plan to sod to reduce the amount of lifting required.
In very hot weather, protect unlaid turf by placing
stacks in shade, covering with moist burlap sacking,
and/or sprinkling.
-
Lay
the first piece of sod along a straight line, such as
a walkway, sidewalk, or driveway.
-
Install
additional pieces in a brick-like pattern.
-
In
sloped areas, begin sodding at the bottom and work your
way up the slope. If the slope is steep, run the pieces
across it.
-
Water
immediately after installation. On very hot days, water
small sections at a time immediately after installation.
Watering immediately is the most important factor in
ensuring the survival of your sod!
-
To
determine whether you have watered enough, lift a corner
of a piece of sod and push a screwdriver or other implement
into the soil. If it's hard to push the tool in and/or
the soil doesn't feel moist, keep watering.
|
